Select your outboard

225 hp, long shaft, remote

Features
Transom Ht. 20"
Remote Model X
Tiller Included
iST- Electronic Shift & Throttle
Electric Start X
Charging System 60A
Prop Included
Power Thrust
Power Tilt & Trim X
Gas Assist
  • In Store Pickup Only
MSRP $22,862.00 $18,979.00

225 hp, XL shaft, remote

Features
Transom Ht. 25"
Remote Model X
Tiller Included
iST- Electronic Shift & Throttle
Electric Start X
Charging System 60A
Prop Included
Power Thrust
Power Tilt & Trim X
Gas Assist
  • In Store Pickup Only
MSRP $22,954.00 $19,055.00

225 hp, XL shaft, remote, counter rotating

Features
Transom Ht. 25"
Remote Model X
Tiller Included
iST- Electronic Shift & Throttle
Electric Start X
Charging System 60A
Prop Included
Power Thrust
Power Tilt & Trim X
Gas Assist
  • In Store Pickup Only
MSRP $23,633.00 $19,619.00

225 hp, XXL shaft, remote

Features
Transom Ht. 30"
Remote Model X
Tiller Included
iST- Electronic Shift & Throttle
Electric Start X
Charging System 60A
Prop Included
Power Thrust
Power Tilt & Trim X
Gas Assist
  • In Store Pickup Only
MSRP $23,288.00 $19,333.00

225 hp, XXL shaft, remote, counter rotating

Features
Transom Ht. 30"
Remote Model X
Tiller Included
iST- Electronic Shift & Throttle
Electric Start X
Charging System 60A
Prop Included
Power Thrust
Power Tilt & Trim X
Gas Assist
  • In Store Pickup Only
MSRP $23,978.00 $19,906.00

Outboard Transom Ht. Remote Model Tiller Included iST- Electronic Shift & Throttle Electric Start Charging System Prop Included Power Thrust Power Tilt & Trim Gas Assist
BF225 20" X X 60A X
BF225 25" X X 60A X
BF225 25" X X 60A X
BF225 30" X X 60A X
BF225 30" X X 60A X

Engine

Type 4-Stroke, SOHC, 60° V6, 24 Valve
Displacement 3,471 cc (212 cubic inches)
Bore & Stroke 89 mm x 93 mm (3.5 x 3.7 inches)
Full Throttle RPM Range 5,000-6,000 RPM
Rated Power 225 HP @ 5,500 RPM
Cooling System Water Cooled
Fuel Delivery Programmed Fuel Injection
Ignition System MicroComputer Programmed
Starting System Electric
Exhaust Through Hub
Lubrication Wet Sump
Trim Range -4° to +16°
Tilt Range 72°

Drive

Gear Ratio 1.86:1
Gear Shift F-N-R

Equipment

Alternator (Electric Start) 90-Amp (1118 watt)
Battery Charging Power 60 Amps (756 watts)
Propeller Optional
Power Tilt NA
Power Trim & Tilt Standard
Gas Assisted Tilt NA
Oil Pressure Alert Standard
Temperature Alert Standard
Rev-Limiter Standard
Speedometer Pickup Standard

Dimensions

Overall Width 625 mm/24.6 inches

Transom Height

L Type 508 mm/20 inches
X Type 635 mm/25 inches
XX Type 762 mm/30 inches

Dry Weight

L-Type 267 kg/589 lbs.
X-Type 272 kg/599 lbs.
XX-Type 277 kg/610 lbs.

Spec

Transom Ht. 30"
Remote Model X
Tiller Included
iST- Electronic Shift & Throttle
Electric Start X
Charging System 60A
Prop Included
Power Thrust
Power Tilt & Trim X
Gas Assist
Reliable, Efficient 4-Stroke Design

World-renowned Honda quality combines proven reliability and superior fuel efficiency, with no oil mixing.

World Famous Quality

The BF200 and 225 share many components with the Honda Ridgeline, Odyssey, and Pilot, gaining years of proven Honda engineering, precision manufacturing and reliability.

Large Displacement V6 - Top performance and durability

A powerful, compact 24 valve SOHC design, without the bulk and weight of long intake runners and multi-camshafts. The narrow V6 design offers top performance and durability as well as great fuel economy.

BLAST® System - Instant acceleration

Boosted Low Speed Torque, or BLAST, improves acceleration at low speeds. A quick movement of the throttle control activates the BLAST® system, advancing the ignition curve aggressively. "Hole Shot" is vastly improved as more horsepower gets the hull up on plane quicker.

VTEC® - Smooth acceleration and power (225hp)

Featured on the BF225, Honda’s Variable Valve Timing & Lift Electronic Control (VTEC®) system provides power where and when you need it. VTEC gives you a broader, flatter torque curve and smooth power delivery throughout the engine’s operating range. The result is a superior combination of power, torque and fuel economy. VTEC is the modern replacement for displacement.

Multi-port Programmed Fuel Injection (PGM-FI) - Powerful performance

Programmed Fuel Injection delivers the precise amount of fuel/air to each cylinder. The result is easy starts and instant throttle response with superior fuel efficiency.

Lean Burn Control® - Superior fuel efficiency

Lean Burn Control® increases fuel efficiency by allowing combustion to operate on a leaner air/fuel mixture. At cruising speed, this engine runs on up to 20% less fuel* than others in its class.
*Based on EPA Specific Fuel Consumption Mode.

Dual Stage Induction - Breathing easier improves performance

Honda’s unique variable intake system optimizes air flow to match the engine’s speed. The result? Maximized combustion efficiency, increased torque, and superb fuel economy.

True 5 Warranty - unmatched peace of mind

Honda's True 5 Warranty is the best in the business. This transferable, non-declining warranty is the same on the last day as it is on the first.

Ultra Low 3 Star CARB Emissions

Environmentally conscious technology. All Honda Marine engines exceed the highest CARB 3-Star rating to meet the rigorous California Air Resource Board's standards.

Extreme Duty Gearcase - better durability

The BF200 and 225 offer a larger, 5 inch diameter gear case, built to withstand the extreme duty cycles of law enforcement and military patrol boats.

Oxygen (O2) and Knock Sensors - Optimum Efficiency

Oxygen (O2) and knock sensors help determine the correct fuel flow and ignition curve to maximize performance and fuel efficiency.

Saltwater protection

Honda has painted the interior cooling passages on the BF200 and 225. This process prolongs the engine's life in the harsh saltwater environment.

Stainless Steel components (Steering Arm, Tilt Tube and all Shafts) - corrosion resistance

Stainless steel components provide durability with long-term corrosion resistance.

NMEA 2000 - On-board connectivity

NMEA 2000 protocols allow engine data to be interfaced with on-board systems and systems displays, such as sonar or GPS.

Superior Battery Charging - More usable power

The BF200 and 225’s charging system features a 90 amp "On Demand" belt-driven alternator with 60 charging amps. This superior design reduces heat buildup and provides outstanding battery charging across the RPM range.

4-Front Corrosion Protection System - Fights the elements

A patented, "Double Sealed" multi-layered paint process. Sacrificial anodes and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.

Engine Alert System - Protects your engine

The ECM monitors vital engine functions and prevents engine damage by alerting the operator of:

  • Overheating
  • Water in Fuel
  • Low Oil PSI
  • Battery
  • Over-Rev
  • Critical Engine Function

2-Pass Cooling System - better cooling for better durability

The unique cooling system maintains an even temperature on all cylinders. The incoming water passes through each aluminum exhaust manifold, then through the cylinder heads and back around the exhaust manifolds before entering the exhaust. This results in increased cooling efficiency and long-term durability!

Tuned Dual Exhaust - increased efficiency

Some competitor's exhaust tracks goes through the middle of the oil pan, pre-heating the oil. Honda's dual exhaust headers wrap around the outside of the oil pan. This reduces heat build-up, and increases engine efficiency and performance.

Counter Rotation Available

Improves efficiency, hull maneuverability and decreases driver fatigue.

Positive Lubrication - better durability

A crankshaft-driven, automotive-style trochoid oil pump ensures long-term durability of critical engine components.

Convenient Single Latch Cowl

A single front-mounted latch combines with 4 securing points to ensure a water-tight seal.

Sealed Starter - Protection for long life

The starter motor is inverted into a sealed chamber that protects the starter drive from the elements.

Fresh Water Flushport

Flushes debris and saltwater out of the engine, extending the life of the outboard.

Slim 60° profile for dual engine applications

No need for expensive transom modifications! The BF200 and 225’s slim 60° profile allows for mounting of dual engines on an industry standard 26” center-to-center distance. Makes repowers easier!

Built-In Pitot Tube

Built-in pitot tube in the gear case eliminates the need to drill holes in your boat for speedometer installation.

Available in 20, 25, and 30 inch shaft models